RFID configuration

When the RFID equipment has been installed, this is how you configure it in Quria.

  1. Go to the Configuration section in the main menu.
  2. Under Organisations, click Workplaces.
  3. Select authority and branch from the dropdown menus.
  4. Click the workplace name and enter the following parameters depending on RFID equipment type.
    RFID equipment typeRFID equipment hostnameRFID equipment port
    Bibliotheka DKrfid.bibliotheca.dk7001
    EasyChecklocalhost10004
    Lyngsoe Systems (previously P.V. Supa)localhost7002
    MK Solutions127.0.0.149500
    Nexbib localhost 2020
  5. Click Save.

Editing the RFID alarm status

When an RFID tag is put on the RFID reader, a note is displayed if its alarm status does not correspond to the item status in the Quria database:

  • Item status checked out: alarm should be off
  • Item status checked in: alarm should be on

If the statuses do not match, you can activate or deactivate the alarm in the context menu of the item. These options are not available if the statuses match.